The ARRIRAW License Key for ALEXA Mini enables in-camera recording in the 2.8K 16:9 MXF/ARRIRAW format.
In combination with the ALEXA Mini 4:3 License Key the ALEXA ARRIRAW License Key will also enable MXF/ARRIRAW recording in Open Gate.
Note: This License Key requires camera software update (SUP) 4.0 or greater. Please refer to the ALEXA Mini manual and SUP release notes for more detail.
This lightweight rod adapter offers 15mm LWS standards to the Compact Bridge lates CBP-1 (19mm) and CBP-2 (15mm) baseplates for ALEXA Mini/ Mini LF. Lens motors, follow focus units and other accessories attached to the 15mm LWS rods are solidary to the camera and won't be disturbed by the balance adjustments of the bridge plate. It attaches to the RMB-3 attachement points on the Compact Bridge Plate.
Please note that the 15mm LWS adapter might have to be removed if frequent transitions from tripod to stabilizer unit are planned. Single 19mm rods can be attached to Rod Mounting Bracket RMB-3 for that effect.
Complete HD and UHD fibre transmission system for use with the AMIRA GL, AMIRA, ALEXA Mini and ALEXA Mini LF. For the ALEXA Mini and the ALEXA Mini LF a different FCA cable set is required.
includes:
K2.0013648 1x 1820-12G FCA Fibre Camera Adaptor 12G
K2.0014813 1x 1820 FCA Lemo assembly
K2.0014814 1x 1820 FCA Cable set for AMIRA
K2.0014659 1x 1835B Dual Link 6G VideoInput Option
K2.0022568 1x 1810 1U Fibre Base Station FBS 4x3G & SL12G
K2.0022570 1x 1810 1U FBS Cable Set
The 1801 FPI allows the use of less expensive, lighter Tactical Fibre Cable for the uncompressed transport of up to 4K video over distances of up to 10Km.
Powered from a local mains supply or battery pack, it provides 100W of camera power over SMPTE cable and has up to a further 100W of power available for accessories local to the unit.
When using the 1801 FPI, the customer must provide a standard ST fiber to SMPTE 311 converter. These are readily available from suppliers such as Canare, Belden, Multidyne or others.
1x Breakoutcable which provides connection for Red Tally and Green Tally IN at the FBS 1810 1U Fibre-Basestation.
Length: 50cm
1x D-sub 9P, Male to 2x XLR 3P, Female (Red Tally and Green Tally IN)
1x Breakoutcable which provides connection for Intercom Production and Engineering IN/OUT at the FBS 1810 1U Fibre-Basestation.
Length: 50cm
1x D-sub 15P, Female to 2x XLR 3P, Female (Production/Engineering IN) and 2x XLR 3P, Male (Production / Engineering OUT)
Full slot, 1U high, 19” rack mount Fibre Base Station
Supports Power, Ethernet, Intercom (Production and Engineering), Audio, Tally (Red/Green), TC, RS 422 and RS4232, HD and UHD fibre transmission up to 2km. 3G SDI, 6G SDI, Dual 6G SDI and 12G SL SDI Output. Lemo fibre camera cable connector for SMPTE 311.
Usable for AMIRA GL, AMIRA, ALEXA Mini and ALEXA Mini LF
Includes Ethernet Protocol Interface (ERI) for direct use of a Sony RCP 1500
Cable set to connect the AMIRA or AMIRA GL with the 1820-12G FCA Fibre Camera Adaptor 12G.
Cable set includes:
1x Genlock
1x SDI return video
2x SDI out
1x Monitour out
1x Time code
1x Ethernet