Wooden Camera Cable-less V-Mount (RED DSMC2)
Wooden Camera Cable-less V-Mount (RED DSMC2)Wooden Camera Cable-less V-Mount (RED DSMC2)Wooden Camera Cable-less V-Mount (RED DSMC2)Wooden Camera Cable-less V-Mount (RED DSMC2)Wooden Camera Cable-less V-Mount (RED DSMC2)Wooden Camera Cable-less V-Mount (RED DSMC2)Wooden Camera Cable-less V-Mount (RED DSMC2)Wooden Camera Cable-less V-Mount (RED DSMC2)Wooden Camera Cable-less V-Mount (RED DSMC2)Wooden Camera Cable-less V-Mount (RED DSMC2)Wooden Camera Cable-less V-Mount (RED DSMC2)Wooden Camera Cable-less V-Mount (RED DSMC2)Wooden Camera Cable-less V-Mount (RED DSMC2)Wooden Camera Cable-less V-Mount (RED DSMC2)Wooden Camera Cable-less V-Mount (RED DSMC2)

Wooden Camera Cable-less V-Mount (RED DSMC2)

633.00 CHF
684.25 CHF incl.8.1% VAT
Item no.
340.220600
Item no.
Standart Hersteller Garantie
Availability
Not available (Verfügbarkeit unbekannt)
Wooden Camera - Cable-less V-Mount (Weapon/Epic-W/Scarlet-W/Raven)
 

Cable-less V-Mount system for the RED Weapon, Epic Weapon (Epic-W), Scarlet Weapon (Scarlet-W), and Raven cameras which utilizes an IDX brand plate with two D-Taps and the Wooden Camera pogo interface module. The assembly will attach without tools directly to the back of the RED Weapon/Scarlet-W/Epic-W/Raven camera, Base Expander Module, REDVolt Expander Module, and some third party modules like OMODs.


This system can be converted between high and low modes. High mode is where the battery plate sits above the back of the camera. Low mode is where the plate is configured to be flush with the top of the camera body leaving batteries in a very compact configuration. An important note is that the RED DSMC2 top handle will clear RED Brick batteries when our Cable-less V-Mount plate is configured in low mode.


The Cable-less V-Mount will communicate percentage or voltage data to the camera's LCD display. Intelligent batteries like RED Bricks, Blueshape, Switronix, PAG, and other batteries utilizing SMBUS or reversed SMBUS will allow for the module to communicate percentage data and estimated run time. Non-SMBUS batteries like some IDX and other low cost batteries will only provide voltage data to the camera through our module.


2x D-Tap ports for accessory power

Specifications:
Weight: 453.592 g (1 lb)
Dimensions: 5 1/2" (142mm) x 3 3/8" (85mm) x 1 3/8" (33mm)

We recommend suitably or as an alternative

Hedbox RP-DLPE12 CANON LP-E12
Not available (Verfügbarkeit unbekannt)

Hedbox RP-DLPE12 CANON LP-E12

724.RP-DLPE12

3.00 CHF
Hedbox RP-DVBN130 Panasonic: VW-VBN130/VBN260/VBN390
Not available (Verfügbarkeit unbekannt)

Hedbox RP-DVBN130 Panasonic: VW-VBN130/VBN260/VBN390

724.RP-DVBN130

3.00 CHF
Hedbox RP-DBLF19 Panasonic EN-EL15
Hedbox RP-DEL21 Nikon EN-EL21
Not available (Verfügbarkeit unbekannt)

Hedbox RP-DEL21 Nikon EN-EL21

724.RP-DEL21

3.00 CHF